Installation

CLICK HERE TO DOWNLOAD .PDF INSTALLATION INSTRUCTIONS

Prepare the Materials needed prior installation

  • WallPaper
  • Inspect the Material, Design, Length, Width and Batch Number

  • Adhesive and Roller
  • Measuring Tape
  • Plumb Line
  • Water Bucket
  • Plastic Smoother/Scraper
  • Cutter / Utility Knife
  • Ladder
  • Sponge
  •  

    Wall Preparation

  • Remove Old WallPaper
  • Wet the surface by using a wet sponge, wait for 10-20 minutes. Start peeling the wallpaper from the corner or seams.

  • Paint the surface with primer.
  • Acrylic Emulsion paint must be painted over the wall especially with Gypsum Boards.
  •  

  • Mark a Vertical straight line using a Plumb Line from the corner, to ensure that subsequent lengths will be straight.
  •  

  • The first length to be hung is placed at ceiling level allowing sufficient excess for trimming and pasted to the wall following the previously marked vertical line. The non-woven wall covering is now rolled over with a foam rubber roller to smooth out any air bubbles and wrinkles.
  •  

  • Align and glue the non-woven strips edge to edge to the wall and use a foam rubber roller to roll over the strip from side to side to smooth out any air bubbles and wrinkles.
  •  

     

  • Remove excess wallpaper by using a Utility knife and plastic scraper pressed into the angular space between wall and ceiling.
  •  
  • Remove excess paste on seams with a wet sponge.
  •  

    Download THE ABC OF WALLPAPER, A Textbook for Craftsmen and Those who wish to be.
    By Wolfgang Raith.
    By order of the A.S Creation Tapetenstiftung www.as-creation.com

    Click Here



    WORRY FREE CREDIT CARD PAYMENTS ARE SECURED & POWERED WITH:



    Click here to learn more about
    Online Invoicing & Payments with Paypal